Data Capture Requirements
The below fields are required to correctly commission a Taggle enabled device.
Omitting any of the fields may require additional field visits to be able to commission a device.
All of the below is captured easily in the Aqualus Water Mobile App.
Field | Description |
|---|---|
Taggle Serial Number | Numeric |
Meter Serial Number | Alphanumeric |
Magnet Swipe completed | Yes/No |
Meter Reading | in kL, but capturing to 3 decimal places 
|
Readings Date/Time | dd/mm/YYYY hh:mm |
Rate per pulse | Pulse factor (k-factor) of meter |
Location (Latitude and Lognitude) | GPS Location in decimal degrees |
Above/Below Ground | Above/Below |
Risk of Submersion | Yes/No |
Against Metal | Yes/No |
Photo 0 | Capturing site photo prior to installation |
Photo 1 | Capturing Taggle serial number |
Photo 2 | Capturing Meter serial number and reading
|
Photo 3 | Capturing install environment and any obstructions which may impact radio performance
|
Photo 4 | Optional |
|
|
Ensure date, time, and location meta data is activated on your data capture tool for QA and verification