SP2A/HP3D Cyble
Cyble Water Meter Sensor
Installation Instructions
The Cyble sensor clips into the meter at three points. It will only fit in one orientation.
In the diagram below, the pulse rate is circled, and it can either be 1 / 2.5 / 10 / 25 / 100 / or 1000.
KLF: 1 means that one revolution is required for one pulse increment.
Step 1. Install the sensor into place - It will only fit in one orientation. If you are trying to force it or you
encounter difficulty you are not fitting it the right way.
Step 2. Once in place secure with the white plastic screw provided into the hole indicated by the arrow and place an anti-tamper cap over the top.