/
SP2A/HP3D Q4000

SP2A/HP3D Q4000

The ADC1 part number has been superseded by the SP2A.
The HP1 part number has been superseded by the HP3D.

Source: http://scadametrics.com/blog/wp-content/uploads/2009/12/Module_Art_0031.jpg

Additional photos can be found at: http://scadametrics.com/blog/?p=61

 

Note: If there is an existing flylead, follow same steps for removing the blank cover above.

The existing 2-core flyleads provided pre-installed on some Q4000 magflows are only designed to communicate only with Elster’s own telemetry and cannot be wired into a Taggle SP2A or HP3D.

Q4000 Pulser Specification Sheet